3M™ Single Coated Adhesive Tapes

3M™ Single Coated Tapes, also known as Single Sided Tapes, consist of adhesive that is applied to one side of a backing. Single coated tapes are usually 2-5 mils of adhesive and generally rests on backings that are 1- 10 mils thick. Single coated adhesives tape can differ from acrylic, rubber or silicone. Backings vary and are usually paper, polymeric films, foils, nonwoven or woven substrates. The backing is an important characteristic of the tape since it typically is what affects how the tape will withstand its application environment.

For example, a polyester backing would be used for a thin gauge, high temperature and chemical resistant application. However, a polyethylene backing would be the appropriate selection if you're looking for a more conformable tape that is also chemical, acid and moisture resistant.

Some more common examples of single sided tapes include electrical, masking, carton sealing and medical tapes.

Single Coated Tape from Tekra

If you’re searching for the correct single sided adhesive tape that will best fit your application, check out the 3M™ Converter Markets Selection Guide for more product details or contact us today.

 

3M™ Single Coated Tapes Products

Features

  • Clear, high transparency, non-yellowing, heavy duty
  • Edge and hole reinforcing
  • Thin

Features

  • Excellent resistance to most chemicals used in typical electroplating processes
  • Non-corrosive
  • Flexible, conformable

Features

  • High temperature aluminum foil tape: -65 degrees F to 600 degrees F temperature range
  • Silicone adhesive
  • Dead soft

Features

  • Very low tack adhesive system for use as a protective tape
  • Transparent, light adhesive, film
  • Thin, high tear resistance, easy removal on large surfaces, cover tape

Features

  • Clean removing high temperature silicone adhesive
  • Tough non-slivering polyester backing
  • Works up to 400 degrees F
3M™ Ultra Durable Floor Marking Tape 971

Features

  • Withstands scuffing in heavy traffic areas
  • Provides a strong bond
  • Available in a variety of colors

Features

  • Sound management
  • Squeak and rattle prevention
  • Noise reduction

Features

  • Dead soft tape
  • Resists flame, moisture, weather, and UV degradation
  • Heat and light reflective

Features

  • Dead soft tape
  • Resists flame, moisture, weather, and UV degradation
  • Heat and light reflective

Features

  • High performance thin aluminum foil tape
  • Dead soft
  • Transparent adhesive for permanent usage

Features

  • Conformable
  • 1.2 mil adhesive on 5.6 mil, 83# brown kraft liner
  • Linered version of 431

Features

  • Dead soft
  • Combined with nonwoven web
  • Superior sealing benefits of foil with ease of handling and strength of cloth

Features

  • Constraining layer coated with 2.0 pressure sensitive polymer
  • Blue polyethylene easy-release liner
  • Controls resonant vibrations from -76°F to 68°F

Features

  • Constraining layer coated with 2.0 pressure sensitive polymer
  • Blue polyethylene easy-release liner
  • Controls resonant vibrations from -76°F to 68°F

Features

  • Cold temperature damping tape
  • Constraining layer coated with 5.5 pressure sensitive polymer
  • Blue polyethylene easy-release liner

Features

  • Foil/foam sheet laminate
  • Meets F.A.R. 25.853(a)
  • Absorbs and dissipates vibration, reduces noise, reduces metal fatigue

Features

  • Premium damping tape
  • Constraining layer coated with 5.0 pressure sensitive polymer
  • Polycoated paper easy-release liner

Features

  • Clear, high transparency, non-yellowing
  • Edge and hole reinforcing
  • Thin

Pages

Search form

×