3M™ Double Coated Adhesive Tapes

Double coated tapes consist of pressure-sensitive adhesive on both sides of a carrier. The carrier reinforces the substrate while, at the same time, allows for easier dispensing. Because of the added layer, double coated tapes tend to be thicker and will generally have lower temperature resistance simply due to the limitations of the carrier that the adhesive rests on.

When two distinct adhesives are needed in order to join dissimilar surfaces, double coated tapes are the preferred choice and are often referred to as "differential tapes." For instance, you may have a need for a permanent adhesive on one side of a carrier and a removable on the opposite.

Double coated tapes can be used reinforce substrates. For instance, they can be used to join porous substrates, such as foam, to help keep the substrate from reshaping itself. They are also used to help fill any gaps between parts that an adhesive transfer tape would cover. Double coated tapes are often referred to as "spacers" in this type of application.

As a 3M Master Converter, Tekra can convert any double coated tape down to the size you need including for applications needing narrow width slitting.

Check out the 3M™ Converter Markets Selection Guide for more product details.

3M™ Double Coated Tapes Products

Adhesion to high surface energy surfaces

Adhesion to low surface energy surfaces

Features

  • NEW!
  • 2 mils - thinnest DC 300LSE product
  • Excellent anti-lifting properties
  • Bonds well to both low and high surface energy substrates
  • Good resistance to consumer chemicals

Features

  • Film carrier
  • 5.9 mils
  • Bonds well to both low and high surface energy substrates

Features

  • Features dual liner for ease in selective die cutting
  • Film carrier adds dimensional stability to foams and other substrates
  • Easier to handle tape during slitting and die-cutting
  • Bond strength of 3M™ Laminating Adhesive 300LSE increase as a function of time and temperature

Features

  • Film carrier adds dimensional stability to foams and other substrates
  • Easier to handle tape during slitting and die-cutting
  • Bond strength of 3M™ Laminating Adhesive 300LSE increase as a function of time and temperature
  • Very high initial adhesion

Features

  • Good bond to silicone rubber
  • Strong holding power to various silicone surfaces
  • 3M™ Adhesive 350 provides high adhesion to a variety of surfaces
  • Thin, polyester carrier provides dimensional stability and improved handling
3M™ Double Coated Tapes Toolbox Resources

Search form

×