3M™ Double Coated Tapes

Double coated tapes consist of pressure-sensitive adhesive on both sides of a carrier. The carrier reinforces the substrate while, at the same time, allows for easier dispensing. Because of the added layer, double coated tapes tend to be thicker and will generally have lower temperature resistance simply due to the limitations of the carrier that the adhesive rests on.

When two distinct adhesives are needed in order to join dissimilar surfaces, double coated tapes are the preferred choice and are often referred to as "differential tapes." For instance, you may have a need for a permanent adhesive on one side of a carrier and a removable on the opposite.

Uses of Double Coated Tape

Double coated tapes, also known as double sided tapes, can be used to reinforce substrates. For instance, they can be used to join porous substrates, such as foam, to help keep the substrate from reshaping itself. They are also used to help fill any gaps between parts that an adhesive transfer tape would cover. Double coated tapes are often referred to as "spacers" in this type of application.

3M™ Double Coated Tape from Tekra

As a 3M Master Converter, Tekra can convert any double coated tape down to the size you need including for applications needing narrow width slitting.  Tekra also carries a wide variety of 3M™ Double Coated foam tapes.  Check out the 3M™ Converter Markets Selection Guide for more product details and contact us with any questions you have.

3M™ Double Coated Tapes Products

Adhesion to high surface energy surfaces

Adhesion to low surface energy surfaces

Features

  • Differential foam tape. 300MP for foam laminating & 300LE for bonding to low surface energy substrates
  • Film carrier adds dimensional stability to foams and other substrates
  • Easier to handle tape during slitting and die-cutting

Features

  • Features dual liner for ease in selective die cutting
  • Film carrier adds dimensional stability to foams and other substrates
  • Easier to handle tape during slitting and die-cutting

Features

  • Film carrier adds dimensional stability to foams and other substrates
  • Easier to handle tape during slitting and die-cutting
  • Bond strength of 3M™ Laminating Adhesive 300LSE increase as a function of time and temperature

Features

  • Thin polyester film for dimensional stability
  • Ease of die cutting and laminating

Features

  • Thin polyester film for dimensional stability
  • Ease of die cutting and laminating
  • Black version of 9690

Features

  • Adheres to powdercoated surfaces
  • High holding strength
  • moisture stable

Search form

×