3M™ Single Coated Adhesive Tapes

3M™ Single Coated Tapes, also known as Single Sided Tapes, consist of adhesive that is applied to one side of a backing. Single coated tapes are usually 2-5 mils of adhesive and generally rests on backings that are 1- 10 mils thick. Single coated adhesives tape can differ from acrylic, rubber or silicone. Backings vary and are usually paper, polymeric films, foils, nonwoven or woven substrates. The backing is an important characteristic of the tape since it typically is what affects how the tape will withstand its application environment.

For example, a polyester backing would be used for a thin gauge, high temperature and chemical resistant application. However, a polyethylene backing would be the appropriate selection if you're looking for a more conformable tape that is also chemical, acid and moisture resistant.

Some more common examples of single sided tapes include electrical, masking, carton sealing and medical tapes.

Single Coated Tape from Tekra

If you’re searching for the correct single sided adhesive tape that will best fit your application, check out the 3M™ Converter Markets Selection Guide for more product details or contact us today.

 

3M™ Single Coated Tapes Products

Features

  • Excellent resistance to most chemicals used in typical electroplating processes
  • Non-corrosive
  • Flexible, conformable

Features

  • Very low tack adhesive system for use as a protective tape
  • Transparent, light adhesive, film
  • Thin, high tear resistance, easy removal on large surfaces, cover tape
3M™ Ultra Durable Floor Marking Tape 971

Features

  • Withstands scuffing in heavy traffic areas
  • Provides a strong bond
  • Available in a variety of colors

Features

  • Designed to provide lower adhesion and unwind than Tape 470
  • Temperature resistance up to 170 degrees F

Features

  • Low temperature tape
  • Good instant adhesion
  • Easy tear

Features

  • General purpose vinyl tape
  • Various vivid colors
  • Use in non-critical applications

Features

  • General purpose printed backing
  • Black and yellow diagonal stripe
  • Easy to apply

Features

  • General purpose printed backing
  • Red and white diagonal stripe
  • Easy to apply

Features

  • Heavy duty protective tape
  • Abrasion resistance
  • 6 month outdoor use

Features

  • Clean removal
  • High temperature (400 F) range
  • Non-silicone adhesive

Features

  • Clean removal
  • High temperature (400 F) range
  • Non-silicone adhesive

Features

  • Green rubber adhesive with clear, easy-release film liner
  • Good conformability
  • Electrically and thermally conductive

Features

  • Green rubber adhesive
  • Good conformability
  • Electrically and thermally conductive

Features

  • UPVC film tape with rubber adhesive
  • Optically transparent and photographically opaque
  • Qualified to meet MIL-T-40620A

Features

  • General purpose paper tape for holding, bundling, sealing, general paint masking jobs
  • Good instant adhesion
  • Easy tear

Features

  • General purpose paper tape for holding, bundling, sealing, non-critical masking jobs
  • Good instant adhesion
  • Easy tear

Features

  • Cost-effective
  • Low temperature tape
  • Good instant adhesion

Features

  • White, good tack
  • Excellent solvent and chemical resistance
  • Thin

Pages

Search form

×