3M™ Single Coated Adhesive Tapes

3M™ Single Coated Tapes, also known as Single Sided Tapes, consist of adhesive that is applied to one side of a backing. Single coated tapes are usually 2-5 mils of adhesive and generally rests on backings that are 1- 10 mils thick. Single coated adhesives tape can differ from acrylic, rubber or silicone. Backings vary and are usually paper, polymeric films, foils, nonwoven or woven substrates. The backing is an important characteristic of the tape since it typically is what affects how the tape will withstand its application environment.

For example, a polyester backing would be used for a thin gauge, high temperature and chemical resistant application. However, a polyethylene backing would be the appropriate selection if you're looking for a more conformable tape that is also chemical, acid and moisture resistant.

Some more common examples of single sided tapes include electrical, masking, carton sealing and medical tapes.

Single Coated Tape from Tekra

If you’re searching for the correct single sided adhesive tape that will best fit your application, check out the 3M™ Converter Markets Selection Guide for more product details or contact us today.

 

3M™ Single Coated Tapes Products

Features

  • Dead soft tape
  • Resists flame, moisture, weather, and UV degradation
  • Heat and light reflective

Features

  • Dead soft tape
  • Resists flame, moisture, weather, and UV degradation
  • Heat and light reflective

Features

  • Low temperature tape
  • Good instant adhesion
  • Easy tear

Features

  • Impregnated with PTFE (Polytetrafluoroethylene)
  • Temperature use range -100 degrees F to 500 degrees F
  • General purpose, thin, conformable, high strength

Features

  • Cost-effective
  • Low temperature tape
  • Good instant adhesion

Features

  • Extruded PTFE film tape with non-silicone, rubber adhesive
  • Temperature use range 40 degrees F to 300 degrees F
  • Autoclave and composite bonding

Features

  • Specifically engineered forms splicing tape
  • Construction is skip=slit for easy separation
  • Excellent heat resistance up to 400 degrees F

Features

  • Adhesion to low energy surfaces
  • Highest adhesion polyester tape, quick grab, high tack
  • Good temperature resistance

Features

  • Translucent, 3.0 mil UHMW backing
  • Solvent resistant acrylic adhesive
  • Temperature use range -30 degrees F to 225 degrees F

Features

  • Unique non-woven porous backing that has high air/gas permeability
  • Good burst strength
  • Good solids barrier for minimal voids and less clean up

Features

  • Very conformable film backed tape
  • Low profile to achieve an excellent paint line on highly contoured surfaces
  • Good instant adhesion

Features

  • High performance film backed tape
  • Low profile and high adhesion to achieve excellent paint lines
  • Natural rubber adhesive for good instant adhesion

Features

  • High performance film backed tape
  • Low profile and high adhesion to achieve excellent paint lines
  • Natural rubber adhesive for good instant adhesion

Search form

×