3M™ Single Coated Adhesive Tapes

3M™ Single Coated Tapes, also known as Single Sided Tapes, consist of adhesive that is applied to one side of a backing. Single coated tapes are usually 2-5 mils of adhesive and generally rests on backings that are 1- 10 mils thick. Single coated adhesives tape can differ from acrylic, rubber or silicone. Backings vary and are usually paper, polymeric films, foils, nonwoven or woven substrates. The backing is an important characteristic of the tape since it typically is what affects how the tape will withstand its application environment.

For example, a polyester backing would be used for a thin gauge, high temperature and chemical resistant application. However, a polyethylene backing would be the appropriate selection if you're looking for a more conformable tape that is also chemical, acid and moisture resistant.

Some more common examples of single sided tapes include electrical, masking, carton sealing and medical tapes.

Single Coated Tape from Tekra

If you’re searching for the correct single sided adhesive tape that will best fit your application, check out the 3M™ Converter Markets Selection Guide for more product details or contact us today.

 

3M™ Single Coated Tapes Products

Features

  • High temperature aluminum foil tape: -65 degrees F to 600 degrees F temperature range
  • Silicone adhesive
  • Dead soft

Features

  • High performance thin aluminum foil tape
  • Dead soft
  • Transparent adhesive for permanent usage

Features

  • Conformable
  • 1.2 mil adhesive on 5.6 mil, 83# brown kraft liner
  • Linered version of 431
3M™ Polyester Film Electrical Tape 1350F

Features

  • Decabromo Diphenyl Oxide (DBDPO) Free
  • Adhesive requires no heat, moisture or other manner of preparation to affect application
  • Designed for continuous operation not exceeding 130°C (266°F) per UL and CSA listings

Features

  • Gray, 2.0 mil PTFE skived backing
  • Temperature range -65 degrees F to 500 degrees F
  • Conformable

Features

  • High temperature aluminum foil tape: -65 degrees F to 600 degrees F temperature range
  • Silicone adhesive
  • Dead soft

Features

  • Clean removal
  • High temperature (400 F) range
  • Non-silicone adhesive

Features

  • Ultra low tack adhesive
  • Smooth paper flat backing
  • Clean removal, printable

Features

  • Yellow, high tack, high adhesion, thick backing
  • Excellent solvent and chemical resistance
  • Thin

Features

  • High temperature PTFE film tape, slick surface, silicone adhesive
  • Temperature use range -65 degrees F to 500 degrees F
  • Great for roller wrapping, general purpose, conformable

Features

  • PTFE extruded film tape with silicone adhesive
  • Temperature use range -65 degrees F to 500 degrees F
  • Great lay flat applications

Features

  • Clean removing high temperature silicone adhesive
  • Tough non-slivering polyester backing
  • Works up to 400 degrees F

Features

  • Rubber-strip coated along edges of tape only
  • Tack-free center "window"
  • Holds rivets in place during riveting

Search form

×